StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Evaluation of corrosion rate AK80 and ZK60 Mg alloys - Essay Example

Cite this document
Summary
Since there are no other forms of localized attack it is relatively simple to predict the amount of material that would be removed by corrosion at the end of a certain period of time. This is…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER94.1% of users find it useful
Evaluation of corrosion rate AK80 and ZK60 Mg alloys
Read Text Preview

Extract of sample "Evaluation of corrosion rate AK80 and ZK60 Mg alloys"

Download file to see previous pages

(R.K. Sinnott, 2005) (2) Galvanic Corrosion- When two dissimilar metals are in contact in an atmosphere conducive to corrosion, then by its position in the electrochemical series one forms the anode and the other forms the cathode. The anode thus formed readily corrodes. This principle is used to protect the outside hull of ships by using sacrificial zinc anodes. By its position in the electrochemical series zinc forms the anode and undergoes material erosion thereby protecting the steel hull.

(Oliver M. Siebert, B.et al; 1997) (3) Pitting- This is a highly localized form of corrosion. Usually materials are given a good surface finish to prevent its occurrence. The rate of corrosion in such cases is difficult to predict because once the corroding point breaks through the surface finish the material degradation progresses in a rapid manner. This proceeds by forming a pit and in an oxygenated atmosphere its activity is increased. Slag inclusion and entrapment of air during welding and formation of bubbles in pipes and valves during liquid flow all lead to pitting corrosion. (4) Inter-granular Corrosion-This is a form of corrosion which happens in alloying materials.

Since alloys are a mix of different metals, the impurities tend to accumulate at the grain boundaries during heat treatment. This leads to propagation of corrosion although the amount of material corroded is small. (Oliver M. Siebert, B.et al; 1997) (5) Stress induced corrosion- This form of corrosion proceeds when materials are subjected to highly stressed environments. After a welding process, there will always be residual stresses that need to be relieved by post weld heat treatment. Failure to do so will lead to these stresses creating cracks and fissures in the welds.

Materials that are subjected to repeated cyclic loads may fail due to fatigue stresses that are generated with time. Under such conditions the

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Evaluation of corrosion rate AK80 and ZK60 Mg alloys Essay”, n.d.)
Evaluation of corrosion rate AK80 and ZK60 Mg alloys Essay. Retrieved from https://studentshare.org/miscellaneous/1572723-evaluation-of-corrosion-rate-ak80-and-zk60-mg-alloys
(Evaluation of Corrosion Rate AK80 and ZK60 Mg Alloys Essay)
Evaluation of Corrosion Rate AK80 and ZK60 Mg Alloys Essay. https://studentshare.org/miscellaneous/1572723-evaluation-of-corrosion-rate-ak80-and-zk60-mg-alloys.
“Evaluation of Corrosion Rate AK80 and ZK60 Mg Alloys Essay”, n.d. https://studentshare.org/miscellaneous/1572723-evaluation-of-corrosion-rate-ak80-and-zk60-mg-alloys.
  • Cited: 0 times

CHECK THESE SAMPLES OF Evaluation of corrosion rate AK80 and ZK60 Mg alloys

Pitting corrosion

halides like chloride ions which can destroy protective or passive surface films of aluminium, stainless steels, nickel alloys, etc.... It occurs when these alloys are exposed to chloride [or halide] containing solutions.... corrosion is the deterioration of certain intrinsic properties in mostly metallic material due to reactions with its environment, leading to the damage of original metal.... This type of "corrosion is an extreme case of localised attack which results in the development of cavities or pits in the metal surface" caused by a lack of oxygen around a small area....
2 Pages (500 words) Essay

Corrosion in Cars

( Hamilton Bruce and Macauley, 1998) This method of using salt to melt the ice on roads was introduced following World War II which led to an increase of corrosion, affecting the functional and structural integrity of the vehicle.... Some of the common pitfalls of corrosion due to the presence of salts were the formation of holes on body panels, corrosion of brake linings, wear and tear of the frame and bumper supports, discoloration and pitting effects on surfaces of vehicles....
10 Pages (2500 words) Research Paper

Corrosion Phenomena

The paper "Corrosion Phenomena" borrows from various secondary sources to articulate the various forms of corrosion phenomena, determine the consequences and analyze the technological and chemical advances made in containing the problem, appreciating that controlling it could be almost impractical.... hellip; corrosion phenomena have been in existence for as long as the earth has existed.... Since the ancient days, corrosion has been noted to destroy the quality of lives and the technical progress of human beings....
10 Pages (2500 words) Research Paper

Engineering Behaviour of Perths Soils

The main objective of this paper “Engineering Behaviour of Perth's Soils” is to carry out a comprehensive analysis of soil samples collected from some four different sites in the Berth region: Yanchep, Swan valley, southern River, and Scarborough area.... hellip; During the analysis, the determination of the relative density of the soil samples was critically important in evaluating the engineering behaviour of the soil samples particularly with regard to the compactness of a particular soil mass....
50 Pages (12500 words) Dissertation

Stress Corrosion with its Effects

There are very many different mechanisms of corrosion.... dded complexity and expense of types of equipment due to designing it in order to withstand a certain amount of corrosion.... This term paper "Stress corrosion with its Effects" presents corrosion as the mechanical bit by bit eroding of a surface of a solid substance by either chemical reaction or friction.... A most likely factor is that most products are being designed to optimize performance, reduce the development cost, and eventually take advantage of technological developments, but to the contrary, corrosion with its control is rarely accorded the proper attention it deserves yet it represents a very common failure....
6 Pages (1500 words) Term Paper

Atmospheric Corrosion and Galvanic Corrosion Processes

This case study "Atmospheric corrosion and Galvanic corrosion Processes" presents atmospheric corrosion and galvanic corrosion processes.... Atmospheric corrosion is an electrochemical process that occurs naturally on the surface of a metal.... Galvanic corrosion occurred between 2 metals in an electrolyte.... hellip; corrosion occurs when two metals are in an electrolyte or when metal has moisture and oxygen on its surface....
7 Pages (1750 words) Case Study

Stress Corrosion Cracking

It gives engineers, researchers, managers, and other stakeholders a better view of what is really going on with the metals they use, what the extent of corrosion will develop in a given span of time, what will be the damage caused by the corrosion on the materials, equipment, and infrastructures using the metals, and so on and so forth.... Understanding the mechanisms of corrosion will also allow scientists and chemists to devise anti-corrosive chemicals that will counter or impede the development of corrosion in metals, thus giving metals a longer lifespan....
7 Pages (1750 words) Coursework

Corrosion Mechanisms and Processes

hellip; During the early times where indirect methods of controlling corrosion are yet to be discovered, mankind has struggled to overcome the limitations of their most astounding discovery, the metals, knowing that all the efforts they have done to extract and process these metals from their ores will be in vain if the rate of corrosion is not reduced.... The author of the paper "corrosion Mechanisms and Processes" argues in a well-organized manner that mankind has dealt with corrosion since they began using metals....
7 Pages (1750 words) Term Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us